Momentary SPST Switch, NO snap action, sealed construction, mounted on an ECO potentiometer with XA terminals.
Contact rating: 5 to 24VDC, 1 to 50mA resistive load
Insulation voltage: 30VDC
Contact Resistance: 100m ohm max. (rated 5VDC, 1mA)
Insulation Resistance: 100M ohm min. (at 250VDC)
Dielectric strength: 500VAC 50/60 Hz for 1 min.
Bounce time: 5 ms max.
Life expectancy: 1,000,000 operations
Operating temperature: -25°C to +70°C
Please complete ALL details below and click 'Send Form'
Specify Length L*
& Special Request(s)
Email Address *
Type of Business
This information is supplied in good faith but the customer is politely reminded that it is their responsibility to check the suitability of our products for their particular application, production techniques and processes. Please note that all dimensions are for reference purposes only and, as it is the Company's policy to continuously improve our products, we reserve the right to incorporate changes without notice.
CastelcoTM and OmegTM are
trademarks of Omeg Limited, Registered No. 600441,
Imberhorne Industrial Estate, East Grinstead, West Sussex RH19 1RJ Tel.+44(0)1342