Potentiometer switch manufacturer, Omeg 'Make us a component part of your business'

ENQUIRY FORM
OMEG ROTARY ENCODER with ILLUMINATED SPINDLE

E12 Datasheet Issue 2 full information (pdf) The 12mm incremental, digital, 24-pulse, rotary encoders with illuminated spindles and conductive tracks have either a single colour LED without a switch or two LEDs when an optional, momentary action switch is fitted.

For physical dimensions and encoder output please refer to our Encoder datasheet (pdf)
E12 Rotary encoder - horizontal, red Encoder knob - P1919 Encoder knob - P1617 E12 Rotary encoder - vertical, green

SPECIFICATION

Encoder feature:

Resolution
Encoder Rating
Phase A and B
Rotation
Insulation Resistance
Life
Operating Temperature
Specification:

24 pulses/360° for each phase
DC 5V 0.5mA
Common Terminal C
360° endless
100 Megohms
30,000 ops min at rated load
-25°C to +70°C
Specification:

DC 5V 10mA
Momentary, push to make
SP (single pole)
0.50mm
20,000 ops min at rated load
100 Megohms
200 milliohms
Insulated from switch
-25°C to +70°C
optional Switch feature:

Contact Rating
Actuation
Type
Switch Travel
Life
Insulation Resistance
Contact resistance
Plunger
Operating Temperature

ORDER CODE explanation

Encoder WITHOUT switch

Prefix

Mounting orientation


Detents


Spindle type

LED illumination


Order code:

E12

V = Vertical or
H = Horizontal

N = None or
24 = 24 detents

S24 = Splined L=24mm

R = Red or
G = Green or
B = Blue
Order code:

E12

V = Vertical or
H = Horizontal

N = None or
24 = 24 detents

S25 = Splined L=25mm

BG = Blue and Green or
BO = Blue and Orange or
GR = Green and Red

/S = Switch is fitted
Encoder WITH switch

Prefix

Mounting orientation


Detents


Spindle type

LED illumination



Suffix

Please complete ALL details below and click 'Send Form'

Special Request(s)
Quantity
Order No.
(As applicable)
Date Required
Email Address *
Telephone No.
Fax. No.
Address
Name *
Job Title
Company
Type of Business
This information is supplied in good faith but the customer is politely reminded that it is their responsibility to check the suitability of our products for their particular application, production techniques and processes. Please note that all dimensions are for reference purposes only and, as it is the Company's policy to continuously improve our products, we reserve the right to incorporate changes without notice.