Rotary Switches
ON/OFF Rotary Switches without a potentiometer function
Manufactured to EN61058-1 Standard
Rotary Switches (on/off)
Dimensions for Rotary Switches are representative of range:
The Datasheets below show the switches available
Switch Specification:
- manufactured and Tested to EN61058-1 Standard
- Contact rating: 4A/250Vac 10A/12Vdc
- Surge rating (0.01 seconds) 80 Amps
- Contact gap: 2mm (micro disconnection of switch – micro separation of contacts)
- Proof voltage: 3KV min.
- Switch contacts: Silver/Tin Oxide
- Housing material: Flame Retardant Glass filled polyester UL 94 VO
- Life: 10,000 (minimum) operations at rated load
- Mechanical rotation: 45°
- Operating torque: 1.5 – 6 N.cm (dependent on switch selected)
The B4 series is no longer certified however the previous Rotary Switch Certificate can be found Here.
All Switch modules have the option of either PC Terminals for Printed Circuit Boards or OW Terminals for soldering.
Rotary Switch (on/off)
Rotation restricted to 45°
B4PC1S – 4 Amp Single Pole Switch
PC – Printed Circuit Terminals
B4OW1S – 4 Amp Single Pole Switch
OW – Ordinary Wiring Terminals for Soldering
B4PC2S – 4 Amp Double Pole Switch
PC – Printed Circuit Terminals
B4OW2S – 4 Amp Double Pole Switch
OW – Ordinary Wiring Terminals for Soldering
N4PC1S-CH – 4 Amp Single Pole, Double Throw (Change over) Switch
PC – Printed Circuit Terminals
(OW – Ordinary Wiring Terminals for Soldering also available)
N4PC2S-CH – 4 Amp Double Pole, Double Throw (Change over) Switch
PC – Printed Circuit Terminals
(OW – Ordinary Wiring Terminals for Soldering also available)
Push Activated Switches
Omeg’s Push activated switches are available without a potentiometer function upon request
Push Activated Switch
Contact Sales to specify Switch Only
Push Activated Momentary Switch
Contact Sales to specify Switch Only